3
Manual Armon Ayura Version 1.3
Date: August 2018
Parts of the Armon Ayura
Upper arm
: the connection between the shoulder joint and brace
mounting point.
Brace mounting point
: on this point the Brace can be mounted.
Brace
: (not in this picture) the Brace is the connection between the
Ayura and the user. This is where the arm lies in.
Shoulder joint
: the highest rotational point (near to the shoulder).
Hip joint
: the middle rotational point (near to the hip).
Main axle
: the vertical rotational axle
Rotation frame
: frame on which the Ayura rotates.
Main cable
: the main electronics cable
Functions of the Armon Ayura
The Armon Ayura is available in different configurations. The following functions are available:
•
weight compensation adjustment (comes standard)
•
tilt function
•
H/V lock (horizontal/vertical lock)
•
rotation lock
•
wireless control through bluetooth (only for Android)
Depending on the configuration you can have controls with a minimum of 2 buttons up to 6 buttons.
It is possible to add extra functions in the future if necessary.
Installation of the Armon Ayura
The Ayura can be installed on an electric wheelchair, work chair, floor base or an individual solution.
The installation of the Ayura can only be done by certified personel of a certified distributor of
Armon Products.
During the initial commissioning
the Ayura, the distributor should have taken care of: 1. the right
placement of the wheelchair connection through an individual made frame 2. the installation of the
wheelchair connection to a power source (24V=) 3. the installation and right placement of the controls, or
integration of the controls within the desired controlling system 4. the right individual adjustment of the
Brace.
Placing and removing the Ayura
The Ayura is mounted to a wheelchair, workchair, floor base or an individual
solution through the wheelchair connection (from now on WC). See picture.
The Ayura has a quick release system. This system makes it possible to place or
remove the Ayura within a few seconds. This system is built into the rotation frame
and the WC.
Never put anything between the red connector in the WC when the Ayura
is not mounted. This may cause electrical problems.
When the Ayura is not placed and put away, never put it on the main
cable underneath the rotation frame. This may cause cable breakage.
