3. On the watch module, press the button at the 3 o’clock position
repeatedly until it shows the “ARMITRON” logo.
4. Press and hold the button at the 9 o’clock position for a few
seconds, it will show a 12 digits alpha-numeric validation code.
Write this validation code down.
5. In the app, go to settings page, select the device tab and enter your
validation code into the app. The code is not case sensitive.
6. To save battery power, the display will turn off in 15 seconds. Just
press any button to show the code again.
7. After the code is entered, while it is showing on the display, press
the button at the 3 o’clock position twice to exit.
8. After entering the validation code, tap “Pairing”.
9. Input the personal set-up info in the “Info” tab.
10. Tap “Save” to save it.
11. If you skip set-up, your module will use default values.
