background image

Like any sophisticated instrument that can 
be subjected to a wide variety of stresses 
and strains, your Armin Strom requires 
proper care and regular maintenance. We 
generally recommend that a maintenan-
ce service should be carried out every 
3 to 5 years. To ensure that the service is 
carried out professionally, take your watch 
to Armin Strom or an authorized Armin 
Strom retailer. 

We recommend the following considera-
tions, so that your watch is preserved as 
long as possible:

 

keep your watch away from exposure 

to magnetic fields like electric devices, 
speakers or other electromagnetic appli-
ances

 

 

avoid wearing your watch during 

activities involving strong vibrations or 
impacts

 

 

avoid exposing your watch to 

extreme climatic changes, in particular 
changes in temperature or humidity such 
as saunas

 

 

take your watch off before 

you swim in seawater. Rinse your watch 
with fresh water after exposure to salt 
water

 

 

Avoid contact with cosmetics or 

corrosive products as these may damage 
seals, straps or case

 

 

to clean your 

watch, simply wipe it with a little soapy 
water and dry it with a soft cloth

 

 

When 

not being worn, keep your watch in a cool 
dry place

MAINTENANCE 

AND CARE

Summary of Contents for ARR18
















Reviews: