background image

11

GUARANTEE

Armarge Ltd is confident of the 
quality of this product and offers 
an outstanding guarantee. This 
guarantee statement is in addition 
to and in no way prejudices your 
statutory rights.

If this Armarge Icecap-Pro product 
becomes defective due to faulty 
workmanship within 24 months 
from the date of purchase, Armarge 
guarantees to replace defective 
parts/repair products subjected to 
fair wear and tear unless:

 

 

The product has been 

   

subjected to misuse or neglect

;

 

 

The product has sustained 

   

damage through foreign 

   

objects, substances or 

   accidents;

 

 

Repairs have been attempted 

   

by persons other than 

   

authorised Armarge repair staff.

To claim this guarantee, you will need 
to provide proof of purchase to the 
seller or register your new Icecap-Pro 
on our website 

www.armarge.com

 

and to be kept up to date on new 
products and special offers.

FOR EU COUNTRIES ONLY

Do not dispose of electric 
tools with domestic 
waste. In accordance 
with European directive 
2002/96/EC on 
waste electrical and 
electronic equipment 
and implementation as 
national law, electric 
tools that are no 
longer serviceable 
must be collected 
separately and utilised 
for environmentally 
compatible recycling.

EC DECLARATION OF 
CONFORMITY

           

2014/30/EU98/37 EG, 73/23 EWG

EN 60 335-1, IEC 335-1, EN 60 335-2-34,
EN 60 335-2-24/A53:1997, IEC 335-2-34 
(machinery directive.)

Armarge Icecap-Pro 
electronic pipe freezer.

Patent Number EP2191185

Summary of Contents for Icecap-Pro













Reviews: