KNOW YOUR EZ-SHELF:
(Optional)
(Optional)
x1
x1
x1 set
x8
2
1
3
4
9
10
5
6
7
8
IMPORTANT:
Do not over tighten screws
It is recommended to use either Mounting Screws or Double Sided
Tape during install.
1. EZ-Shelf -
The EZ-Shelf
™
is the lowest profile under cabinet
storage solution on the market. A simple magnetic catch and
unique 2-point pivot hinge system allows the EZ-Shelf
™
to open
easily at any position from fully retracted to fully extended.
2. Spacers with Cabinet Mounting
- Spacer is used as an extension
to fit underneath cabinets that have a longer lip and or having
light fixtures.
3. Spacers without Cabinet Mounting
- Extended spacer is needed
only if the desired length is not met.
4. Mounting Screws
- These screws are to be used to screw in the
EZ-Shelf
™
to the cabinet.
5. Spacer Screws
- These screws are used to only connect the EZ-
Shelf
™
to the Spacers.
6. Handle Screw
- The screw is needed to connect the desired
Handle length and for the locking mechanism to work properly.
7. Short handle
- This is a standard handle length
8. Long Handle
- To be used to adapt to any cabinet style.
9. Double Sided Mounting Tape (Optional)
- Can be used instead of
the Mounting Screws. For optimal results it is recommended to
NOT use both Mounting Screws and Double Sided Tape together
during install.
10. Handle Tool
- This tool is to be used with the Handle Screw to
connect the desired handle to the EZ-Shelf
™
.
x1 set
x8
x4
x1
x1
