IntroductIon
operatIng InstructIons
chargIng InstructIons
Important safety InstructIons
maIntenance
The Arlec AT0012 iLantern includes 12 white LEDs. Two methods can be used to charge the
iLanetern; charging with a USB cable connector, charging with a power adaptor.
• In order to turn on/off the iLantern, touch the switch button on the front side of the iLantern
enclosure body; touch it once to turn it on and touch it twice to turn it off.
• In order to make the LED brightness dimmer touch the top face of the iLantern cap once.
Notice: Remember to charge the iLantern before usage
and before storage. The iLantern should not be stored
when it has been discharged.
If this is the first time that you are going to use your
iLantern, you should charge it for 12 hours in order to
become fully charged. After that, charge your iLantern for
6 to 8 hours to become fully charged.
• The power adaptor has been designed to use with this iLantern only.
• Do not use the power adaptor if it has been damaged.
• Do not expose the power adaptor to rain or moisture as it is not water proof.
• Do not let children use the iLantern without adult supervision.
• When the power adaptor is not in use, disconnect it from the electric outlet.
• To avoid dust and dirt build up wipe lightly with a damp cloth as required.
• Do not use solvents or abrasive cleaners on any part of your light.
charge the ilantern
using the usb cable
connector
USB cable connector includes one USB Male
type connector at one end and one concentric
DC plug at the other end.
1. Connect the USB Male type connector to
the computer or a USB charger adaptor,
from where the iLantern can be charged.
2. Connect the concentric DC plug to
the iLantern.
3. After the iLantern has been fully charged,
disconnect the USB Male type connector
from the computer/USB charger adaptor.
4. Disconnect the concentric DC plug from
the iLantern.
charge the ilantern
using the power adaptor
1. Connect the connector at the end of the cable attached to
the power adapter to the iLantern.
2. Connect the power adaptor to an
electrical outlet.
3. The iLantern must not be kept connected to the power
adaptor after it has been charged completely.
4. After the iLantern has been fully charged, unplug the
power adaptor from the electrical outlet and disconnect
the power adaptor from the iLantern.
Electrical Outlet
Power Adapter
USB male type
connector
Concentric
DC plug
Connect the
USB male type
connector to
an adapter or
a USB charger
adapter