3
LCD Display
Operation
Make sure that you read all of the safety warnings before you operate this unit for the first time.
Plug the unit to a standard mains socket and turn on the mains switch. The unit will beep twice.
4
2
ON / Speed Button
Press the ON/ Speed button to start the unit. The unit will start in Normal Mode on Low speed.
Press the button repeatedly to change the fan speed from Low to Medium to High and the speed
indicator will change on the display panel.
Off Button
Press this button once to turn the unit off.
Mode Button
Change the Mode to the desired type (Normal, Natural or Sleep) by pressing the Mode button
repeatedly. There are three settings for operation and the graphic display will display the selected
type chosen.
Normal Mode :-
When the unit is turned ON it will operate in Normal Mode which is the default Mode of the
unit. Under this Mode the fan speed remains constant at the set speed (Low/ Medium/ High).
Corresponding speed indicator will glow on the display panel. This Mode is recommended for
normal operation.
Natural Mode:-
Press the Mode button until the graphic display comes up with which shows that the natural
Mode is selected. In this Mode the fan will operate in a preset program which varies the speed of
the fan between Low, Medium, High & Off, giving a natural breeze effect.
Each speed setting has its own preset program which will vary the speed of the fan accordingly.
If the fan speed is set at High the fan will operate in High Natural Model which varies the speed
between High, Medium, Low & Off. If the fan speed is set at medium the fan will operate in
Medium Natural Mode which varies the fan speed between Medium, Low & Off. If the fan speed
is set at low the fan will operate in Low Natural Mode which varies the fan speed between Low,
Medium & Off.
Sleep Mode:-
Press the Mode button until the Sleep Mode graphic appears. Under this Mode the fan speed
switches between set speeds thus saving energy during night.
If the fan is set at high speed the fan will operate for 0.5Hrs each in High, Medium and Low Natural
Mode. This cycle will continue until the preset time is reached or the unit is turned off. If the fan is
set at medium speed the fan will operate for 0.5hrs each in Medium and Low Natural Mode. This
cycle will continue until the preset time is reached or the unit is turned off. If the fan is set at low
speed setting the fan will continue to operate in Low Natural Mode settings until the preset time
is reached or the unit is turned off.
The reduction in fan speed is shown in the table below.
Preset Fan Speed
Fan Running Time
High
Natural
High
›
Natural Medium
›
Natural low
0-30min 30-60min Continue
Medium
Natural Medium
›
Natural Low
0-30min Continue
Low
Natural Low
continue
Safety Instructions
• READ
all these instructions carefully and store in a safe place for future reference.
•
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• DO NOT
use this unit for functions other than those described in this instruction manual
• DO NOT
tilt the unit. Always keep in upright. Position on a flat and stable surface, where it
cannot be easily knocked over. Take extra care when operating
• DO NOT
connect the unit unless it completely assembled.
• DO NOT
use the unit in a wet room, such as a bathroom or laundry
• DO NOT
touch the unit with wet hands or bare feet
• DO NOT
use the unit in the presence of inflammable substances or vapor such as alcohol,
insecticides, petrol etc.
• DO NOT
use the mains plug to start and stop the unit
• DO NOT
pull the supply cord or place it near a heat source. Always unwind the cord completely
to avoid overheating.
• DO NOT
insert or allow foreign objects to enter the grille openings as this may cause damage to
the appliance and/or user.
• DO NOT
allow children to play with this appliance. This appliance is not intended for use by
children or infirm persons without supervision.
• DO NOT
conduct repairs on this unit. It has been built in accordance with relevant safety and
performance standards. An electrical specialist must carry out all repairs.
•
This unit is intended for indoor use only.
• ALWAYS
unplug the unit from the mains before maintenance or cleaning
• ALWAYS
Ensure that the fan is switched off from the supply mains before removing the guard.
• ALWAYS
use the switch on the control panel to start and stop the unit
• ALWAYS
keep a clearance of at least 200mm from walls furniture and curtains
• ALWAYS
turn off and unplug the unit when not in use
Energy Saving Tips
• Do not locate the fan where furniture or other objects can obstruct the air flow.
• Keep blinds/curtains closed during the sunniest part of the day
• Close the fireplace damper, floor and/or wall registers, so cool air does not escape through the
chimney or duct work
Assembly
1. Remove all the sub assemblies from the box.
2. Unscrew the base fixing device (1) attached at the bottom of the pedestal pole (3). Insert the
pedestal pole in the slot provided on the base plate (2). Carefully turn the unit upside down and
tighten the fixing device (1) to secure the pole to the base. Ensure that the assembly is fixed
securely, then place the unit in an upright position.
3. Put the assembled base with pedestal pole on a flat floor. Place the main body (5) over the
pedestal pole (3) then secure in position by tightening the fastening knob (4).
4. Fix the rear grille (7) onto the head unit (6) with rear grille locking knob (8).
5. Fit the fan blade (9) over the motor shaft then fasten into position with fan blade locking knob
(10) by turning in an anti-clockwise direction.
6. Release the locking clip (11) at the base of the front grille (12) after removing its fixing screw.
Attach the front grille (12) to the rear grille (7) by firstly placing the top of the plastic rim in
position over the rear grille, then sequentially clipping it into place. When in position fasten
locking clip (11) and replace its fixing screw.
Identification:-
1. Base fixing device
2. Base Plate
3. Pedestal Pole
4. Fastening Knob
5. Main Body
6. Head Unit
7. Rear Grille
8. Rear Grill Locking Knob
9. Fan Blade
10. Fan Blade Locking Knob
11. Locking Clip
12. Front Grille
M
OD
E
–
OF
F
TI
M
ER
+
SW
IN
G
ON
SPEED
Control Panel
2.0
H
❶
❷
❹
❼
❻
❺
❽
❾
❸
Identification:-
1. Mode Button
2. Normal Mode
3. Natural Mode
4. Sleep Mode
5. Timer Indicator
6. Swing Angle
Adjustment
7. Horizontal Position
Adjustment
8. Fan Speed Indicator
9. Swing Angle Indicator
1.
2.
3.
4.
5.
6.
8. 9.
11.
10.
1 2.
7.