Arlec APF107 Operating Instructions Download Page 2

3

2

CPIN002693

• 

DO NOT use this unit for functions  

  other than those described in this  
  instruction manual.
•  

DO NOT tilt the unit. Always keep  

  it upright. Position it on a flat and  
  stable surface, where it cannot be  
  easily knocked over. Take extra care  
  when operating.
•  

DO NOT connect the unit unless it  

  completely assembled.
•  

DO NOT use the unit in a wet room,  

  such as a bathroom or laundry 
• 

DO NOT touch the unit with wet  

  hands or feet.
•  

DO NOT use the unit in the presence  

  of inflammable substances or vapour  
  such as alcohol, insecticides, petrol etc.
•  

DO NOT use the mains plug to start  

  and stop the unit.
•  

DO NOT pull the supply cord or  

  place it near a heat source.  
  Always unwind the cord completely  
  to avoid overheating.
•   If the supply cord is damaged it  
  must be replaced by the service  
  agent or a similarly qualified person,  
  in order to avoid a hazard.
•  

DO NOT insert or allow foreign  

  objects to enter the grille openings  
  as this may cause damage to the  
  appliance and/or user.
•  

DO NOT allow children to play with  

  this appliance. This appliance is not  
  intended for use by children or infirm  
  persons without supervision.
•   This unit is intended for indoor  
  use only.

•  

DO NOT conduct repairs on this unit.  

  It has been built in accordance with  
  relevant safety and performance  
  standards. An electrical specialist  
  must carry out all repairs.
•  

ALWAYS ensure that the fan is  

  switched off before removing  
  the guard.
•  

ALWAYS unplug the unit from  

  the mains before maintenance  
  or cleaning.
•  

ALWAYS use the switch on the  

  control panel to start and stop the unit.
•  

ALWAYS keep a clearance of at  

  least 200mm from walls furniture  
  and curtains
•  

ALWAYS turn off and unplug the  

  unit when not in use.
•  This appliance is not intended for  
  use by persons (including children)  
  with reduced physical, sensory or  
  mental capabilities, or lack of  
  experience and knowledge, unless  
  they have been given supervision or  
  instruction concerning use of the  
  appliance by a person responsible for  
  their safety. Children should be  
  supervised to ensure that they do not  
  play with the appliance

•   Do not locate the fan where furniture or 
  other objects can obstruct the air flow.
•   Keep blinds/curtains closed during  
  the sunniest part of the day
•   Close the fireplace damper, floor and/ 
  or wall registers, so cool air does  
  not escape through the chimney  
  or duct work.

ENERGY SAVING TIPS

SAFETY INSTRUCTIONS

IDENTIFICATION

1.  Outer pedestal pole  
2.  Base  
3.  Base Cover 
4.  Inner pole
5.  Off/Speed switch
6.  Height adjustment  

 fastener 
7.  Front grille 
8.  Fan blade 
9.  Rear grille 
10. Carry handle 
11. Motor unit 
12. Oscillation control 

1

2

3

12

11

6

5

4

7

9

8

10

Summary of Contents for APF107

Page 1: ... Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the good...

Page 2: ...It has been built in accordance with relevant safety and performance standards An electrical specialist must carry out all repairs ALWAYS ensure that the fan is switched off before removing the guard ALWAYS unplug the unit from the mains before maintenance or cleaning ALWAYS use the switch on the control panel to start and stop the unit ALWAYS keep a clearance of at least 200mm from walls furnitur...

Page 3: ...d base is stable 3 After loosening the height adjustment fastener and removing it from the outer pole slide the base cover onto the base of the outer pole Replace and secure the height adjustment fastener into position again Now the assembly of the fan base with pole has been completed 4 5 CPIN002693 EXPLODED DIAGRAM TECHNICAL SPECIFICATIONS ASSEMBLY Figure 1 Figure 2 Figure 3 Figure 4 Pole Screws...

Page 4: ...3 The vertical direction of the motor unit can be adjusted by tilting the complete head unit incorporating motor unit and assembled grille forward or back ward until the desired direction is reached Note that stepped positions are obtained within the neck locating mechanism of the motor connector Figure 10 Height Adjustment 4 The fan height can be adjusted by loosening the height adjustment fasten...

Reviews: