Arlec APF107 Operating Instructions Download Page 1

Arlec guarantees this product in accordance with the Australian Consumer Law.

Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be free of defects in 
materials and workmanship for a period of 12 months from the date of purchase; provided the product is not used other than 
for the purpose, or in a manner not within the scope of the recommendations and limitations, specified by Arlec, is new and 
not damaged at the time of purchase, has not been subjected to abuse, misuse, neglect or damage, has not been modified or 
repaired without the approval of Arlec and has not been used for commercial purposes (“Warranty”). 

If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of original  
purchase and your name, address and telephone number, to Arlec at the address below or the retailer from whom you originally 
purchased the product within 12 months from the date of purchase. 

Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and if, in Arlec’s 
reasonable opinion, the Warranty applies, Arlec will at its own option and expense (or authorise the retailer to) replace the 
product with the same or similar product or repair the product and return it to you or refund the price you paid for the product. 
Arlec will bear its own expenses of doing those things, and you must bear any other expenses of claiming on the Warranty.

The Warranty is in addition to other rights and remedies you may have under a law in relation to the product 

 

to which the Warranty relates.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. 

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss 
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the 
failure does not amount to a major failure.

Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.  
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130 
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]

CPIN002693

CPIN002693

WARRANTY

CARE AND MAINTENANCE

50cm

HIGH PERFORMANCE

   

           

FAN

operating 

instructions

APF107

130W

1. Always disconnect the cord from  

the electrical outlet when cleaning 
your fan.

2. Light accumulated dust may be re-

moved from the fan with a soft cloth 
or vacuum cleaner using the dusting 
brush attachment.

3. Wipe the exterior surfaces of the fan 

occasionally with a cloth moistened 
(not dripping wet) with a mild soap 
solution. Dry the case thoroughly 
with a soft dry cloth before operating 
the fan. 

4. Avoid the use of gasoline, benzine, 

thinner etc as they may result in 
damage to the fan.

5. Store the fan in a clean dry place 

when not in use.

Warning: Do not immerse the fan in 

water or allow water to drip into the 

interior of the fan housing as this could 

create a fire or electric shock hazard.

IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY.

Summary of Contents for APF107

Page 1: ... Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the good...

Page 2: ...It has been built in accordance with relevant safety and performance standards An electrical specialist must carry out all repairs ALWAYS ensure that the fan is switched off before removing the guard ALWAYS unplug the unit from the mains before maintenance or cleaning ALWAYS use the switch on the control panel to start and stop the unit ALWAYS keep a clearance of at least 200mm from walls furnitur...

Page 3: ...d base is stable 3 After loosening the height adjustment fastener and removing it from the outer pole slide the base cover onto the base of the outer pole Replace and secure the height adjustment fastener into position again Now the assembly of the fan base with pole has been completed 4 5 CPIN002693 EXPLODED DIAGRAM TECHNICAL SPECIFICATIONS ASSEMBLY Figure 1 Figure 2 Figure 3 Figure 4 Pole Screws...

Page 4: ...3 The vertical direction of the motor unit can be adjusted by tilting the complete head unit incorporating motor unit and assembled grille forward or back ward until the desired direction is reached Note that stepped positions are obtained within the neck locating mechanism of the motor connector Figure 10 Height Adjustment 4 The fan height can be adjusted by loosening the height adjustment fasten...

Reviews: