3
2
• Do NoT use this unit for functions
other than those described in this
instruction manual.
• Do NoT tilt the base. Always keep the
unit in upright position on a flat and
stable surface, where it cannot be
easily knocked over. Take extra care
when operating.
• Do NoT use the unit in a wet room,
such as a bathroom or laundry.
• Do NoT touch the unit with wet
hands or bare feet.
• Do NoT use the unit in the presence
of inflammable substances or vapor
such as alcohol, insecticides, petrol etc.
• Do NoT use the mains plug to start
and stop the unit.
• Do NoT pull the supply cord or
place it near a heat source.
Always unwind the cord completely
to avoid overheating.
• If the supply cord is damaged it
must be replaced by the service
agent or a similarly qualified person,
in order to avoid a hazard
• Do NoT insert or allow foreign
objects to enter the grille openings
as this may cause damage to the
appliance and/or user.
• Do NoT allow children to play with
this appliance. This appliance is not
intended for use by children or infirm
persons without supervision.
• Do NoT conduct repairs on this unit.
It has been built in accordance
with relevant safety and performance
standards. An electrical specialist
must carry out all repairs.
• This unit is intended for indoor
use only.
CPIN002911
• aLWaYS unplug the unit from the
mains before maintenance or cleaning.
• aLWaYS use the switch on the
control panel to start and stop the unit.
• aLWaYS keep a clearance of at
least 200mm from walls furniture
and curtains.
• aLWaYS turn off and unplug the
unit when not in use.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person respible
for their safety. Children should be
supervised to ensure that they do not
play with the appliance.
1. Make sure you read all safety
warnings before first time use.
2 Plug the cord to a mains socket
and turn on the mains switch.
3. With the help of the carry handle
located on the rear grille adjust the
tilt of the fan head.
4. The speed control located at the
rear of the unit allows three speed
settings 0. - 1-2-3.
5. rotate the knob to the desired
speed setting and the fan will run at
the selected speed.
6. To turn the unit Off, rotate the
knob to the position marked ‘0’.
1. Always disconnect the cord from
the electrical outlet when cleaning
your fan.
2. Light accumulated dust may be
removed from the fan with a soft
cloth or vacuum cleaner using the
dusting brush attachment.
3. Wipe the exterior surfaces of the fan
occasionally with a cloth moistened
(not dripping wet) with a mild soap
solution. dry the fan thoroughly with
a soft dry cloth before operating the
fan. Speed control located at the
rear of the unit is not of weather
proof construction so make sure you
do not spill any water over the switch
box while cleaning the unit.
4. Avoid the use of gasoline, benzine,
thinner etc as they may result in
damage to the fan.
5. Store the fan in a clean dry place
when not in use.
WarNiNg: Do NoT immerSe The
FaN iN WaTer or aLLoW WaTer
To Drip iNTo The iNTerior oF
The FaN houSiNg aS ThiS CouLD
CreaTe a Fire or eLeCTriC
ShoCk haZarD.
model No:
aBF200
rated Voltage:
220-240Vac
rated Frequency: 50hz
power:
85 W
assembly
IDentIFICatIOn
OperatIOn
teChnICal speCIFICatIOns
Care anD maIntenanCe
Front Grille
Foot
Fan Blade
Fan Head
Speed Control and Carry Handle (rear)
Base
Place each foot over opening in base
and clip into place over locking tab, with
arrow marking facing outer edge.
Arrow
Marking
Locking
Tab
saFtey InstrUCtIOns