Arktic 233702, User Manual

Page: 9 / 128

9
GB
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems Possible cause Possible solution
The appliance does not
start cooling after connect
to electrical power supply.
Thermal cut-out activated
Contact with the supplier/service
provider for repair.
The compressor is defective.
The power plug/inlet is not con-
nected properly with the power
supply.
Check the connection and make
sure all the connections are cor-
rectly connected.
Cooling is not enough.
The appliance is under strong sun-
light radiation or close to a heat
source.
Move the appliance a new location
to avoid direct sunlight.
The doors are not properly closed
or the sealing gasket is defective.
Close the doors properly.
Too much food is placed inside the
appliance.
Place less food inside the appliance.
Surrounding ventilation is insuffi-
cient.
Check that if sufficient ventilation is
provided by allowing at least 10cm
away from other objects or wall.
Too much noise
The appliance is not placed hori-
zontally.
Check to make sure the appliance is
placed horizontally.
The appliance touches surrounding
wall or other objects.
Check to make sure that at least
10cm away from other objects or
wall.
There are some loose parts inside
the appliance.
Contact with the supplier/service
provider for repair.
LED lamp is not light up The LED is defective
Contact with the supplier/service
provider for repair.