owner’s manual
6
INSTALLATION GUIDE
This product is designed to be mounted on a skid tank using a threaded inlet flange supplied with the
pump. The pump features an integral bypass valve to recirculate and fluid when the pump is operating
with the nozzle closed.
SKID TANK INSTALLATION
To mount the fuel pump on the fuel tank,
1.
Attach the telescoping suction pipe to the tank adapter.
2.
Extend the telescoping suction pipe to within 3” of the bottom of the tank.
3.
Screw the tank adapter to the tank flange.
4.
Install the seal and screen on the adapter and mount the fuel pump on top.
NOTE: Small amount of thread sealant should be applied to each thread to prevent possible leak.
⚠
ATTENTION!
•
Do not use additional check valves or foot valves unless they have a proper pressure relief valve
built into them. Not that additional check valves will reduce flow rate.