Sets the terminator symbol used when uploading AS10
’s
data to the Host-PC. It can be 1 or 2 Bytes
depending on the Communication Interface.
Configuration Method:
Choose or type in a symbol using the
special keyboard shown in Figure
4.14. Show 1 or 2 Bytes. When sure,
click
to transfer the parameter
value to AS10.
Figure 5-15
(1) Data Terminator of USB-HID / BT-HID interface:
Default:
(<0xE7><0x00>). Totals 2 Bytes
(2) Data Terminator of USB-VCP / BT-SPP interface:
Default:
(<0x0D><0x0A>). Totals 2 Bytes
Sets whether to activate Sleep Mode.
Configuration Method:
Choose one, then click
to transfer the parameter setting
to the AS10.
Default setting: Enable (activate)
5-8-2. Timer of Sleep Mode
Sets the waiting time for entering Sleep Mode.
Configuration Method:
Choose a value (range 00:10 ~ 60:00 mm:ss), then click
to transfer the parameter value to the AS10.
Default setting: 05:00
-
43
-
5-7. Data Terminator
5-8. Sleep Mode / Timer
Sets the activation status for Sleep Mode and the Timer value used for entering Sleep Mode. The AS10 will
enter Sleep mode to conserve power if there is no successful Tag scan within a set amount of time.
Figure 5-16
5-8-1. Enter Sleep Mode
Figure 5-17
