Arkray Glucocard X-Meter User Instruction Manual Download Page 70

Page: 70 / 74

Warnings, Precautions & Limitations

• Never make significant changes to your diabetes control program or ignore

physical symptoms without consulting with your healthcare professional.

• Do NOT use the “GLUCOCARD™ X-METER” to measure the blood glucose

level of patients who have received treatment containing maltose,

icodextrin, who have undergone a galactose tolerance test, or xylose

absorption test. This system may overestimate their blood glucose level and

may thus mask hypoglycemia.

• Icodextrin and its metabolites (maltose, maltotriose, and maltotetraose) will

cause falsely higher results.

• Do not use during a xylose absorption test for diagnostic evaluation of

malabsorption as this will cause falsely higher results.

• Infusion of galactose will cause falsely higher results.

• EDTA, heparin, and mono-iodoacetic acid samples of blood may be used.

Do not use other preservatives.

• Do not grasp the meter near the test strip port. A built-in thermosensor used

to minimize measurement errors is installed just inside the port. If you hold this

area, it will be warmed by your fingers, which will adversely affect test

results.

Summary of Contents for Glucocard X-Meter











































































Search results

Summary of Contents for Glucocard X-Meter

Reviews:

Related manuals for Glucocard X-Meter

Brands by name

Popular brands

Arkray Glucocard X-Meter, User Instruction Manual

Search results

Summary of Contents for Glucocard X-Meter

Reviews:

Related manuals for Glucocard X-Meter

Brands by name

Popular brands