Arkray Glucocard Vital User Instruction Manual Download

Page: 20 / 72

Step 5:

Set the hour

Press and release the Back or Forward button to change the hour.

Hold the Back or Forward button down to scroll through quickly.

When the correct hour is displayed, press the On/Off button. The

minute setting then flashes on the display.

Step 6:

Set the minute

Press and release the Back or Forward button until the correct

minute appears. Hold the Back or Forward button down to

scroll through quickly. When the correct minute is displayed,

press the On/Off button. The month setting then flashes on the

display.

Step 7:

Set the month (If day/month format is selected then

Step 7 will set day)

Press and release the Back or Forward button until the correct

month appears. Hold the Back or Forward button down to scroll

through quickly. When the correct month is displayed, press

the On/Off button. The day setting then flashes on the display.

Hour flashing

Minute flashing

Month flashing

Summary of Contents for Glucocard Vital









































































Search results

Summary of Contents for Glucocard Vital

Reviews:

Related manuals for Glucocard Vital

Brands by name

Popular brands

Arkray Glucocard Vital, User Instruction Manual

Search results

Summary of Contents for Glucocard Vital

Reviews:

Related manuals for Glucocard Vital

Brands by name

Popular brands