Arkray Glucocard SHINE XL Page 41 User Manual Download

Page: 41 / 50

www.arkrayusa.com

Caring for the GLUCOCARD Shine XL System

Use a soft cloth or tissue to wipe the meter exterior. If

necessary, dip the soft cloth or tissue in a small amount

of alcohol.
Do not use organic solvents such as benzene, acetone, or any

household and industrial cleaners that may cause irreparable

damage to the meter.

CAUTION
Storage and Handling

•

Do not

expose the meter to direct sunlight or heat for

extended periods of time.

•

Do not

let dirt, dust, blood or water enter into the meter’s

test strip port.

•

Do not

drop the meter or subject it to strong shocks.

•

Do not

try to fix or alter the meter in any way.

• Keep the meter in a cool and airy place.

• Store all meter components in the carrying case to

prevent loss.

• Avoid getting any liquid or moisture in the test strip vial. This

can affect the test strips and cause inaccurate test results.

•

Do not

apply samples other than capillary whole blood or

control solution to the test strip.

Summary of Contents for Glucocard SHINE XL



















































Search results

Summary of Contents for Glucocard SHINE XL

Reviews:

Related manuals for Glucocard SHINE XL

Brands by name

Popular brands

Arkray Glucocard SHINE XL, User Manual

Search results

Summary of Contents for Glucocard SHINE XL

Reviews:

Related manuals for Glucocard SHINE XL

Brands by name

Popular brands