Arkray AUTION ELEVEN AE-4022, Quick Reference Manual

Page: 10 / 26

SEMI-AUTOMATED URINE ANALYZER
AUTION ELEVEN
™
AE-4022
Sample Measurement
5
8. Place test strip on test strip tray.
• Place strip in the detection area of the test strip detection window
with the black marker on right or left.
• The carrying arm sends the test strip into the analyzer and
measurement starts automatically.
9. When buzzer setting is ON, the beeper sounds for two seconds to
signal the timing for dipping the next test strip. Dip the test strip
while you hear the beep.
When measuring continuously, repeat steps 2 to 4.
Set measurement numbers and patient IDs as necessary.
Measurement
Name of each part
Display
Operator panel
Test strip tray
Carrying arm
Cover open button
(on both sides)
Waste box
Maintenance cover
Built-in printer
Rails (white)
Test strip detection
window
Preparation of measurement
Setup (test strip, measurement No., patient ID)
Measurement
Check that there is no used test strips in the waste box.
with buttons Select
[ Select test strip type ] [ Menu screen ]
Select the type of test strip
Dip the entire test strip pad area in the sample for two seconds.
IMPORTANT
Do NOT wet the black mark.
After dipping the test strip in the sample,
remove excess urine by letting the strip
touch the edge of the collection cup.
Set the measurement number
Place a test strip over the detection area of the test
strip detection window, crossing the two white rails
of the test strip tray.
The carrying arm sends the test strip into the
analyzer, and the measurement starts automatically.
Set the patient ID
When measuring continuously, repeat steps 1 to 3 .
Set measurement numbers and patient IDs as necessary.
When the buzzer setting is ON, the beeper sounds
for two seconds to signal the timing for dipping the
next test strip.
Dip the test strip while you hear the beep.
Turn off the instrument after completing all the measurement procedures.
Turn on the power switch at the back of the instrument.
Prepare a sufficient volume of sample in urine collection cup so
that the entire test strip pad area can be dipped in a single
motion. Stir well.
Waste box
Test strip
Test strip
pad area
Do NOT wet the
black mark.
Test strip
Rails (white)
Test strip detection window
Detection
area
(up to 13 digits)
,
(up to 4 digits)
10. Read test results from printout.
11. Turn off instrument after completing all measurement procedures.