4
INSTALLATION
TRANSMITTER
1.
Connect the mains adapter provided to an electrical outlet.
2.
Connect the mains adapter cable to the DC IN input connector
located on the transmitter rear panel.
3.
An audio cable is provided from the transmitter rear panel that can
be connected to the audio outputs (Left and Right) present on a TV
set, Hi-Fi system, VCR or radio-cassette player.
The red Auto On indicator light will light up as soon as you have
connected both the power adapter to the mains outlet AND the audio
cable to a signal source. If the Auto On indicator light remains off, switch
on the audio source and increase its output level until the red indicator
light comes on.
RECEIVER HEADPHONES
1.
Move out the earpad holder from the right hand side (R) of receiver
headphone.
2.
Insert two rechargeable LR03/AAA size batteries taking care to
ensure correct polarity.
3.
Put back the earpad holder to the right hand side of receiver
headphone.
4.
Switch off the receiver headphones and place it into the transmitter
to charge the batteries for 24 hours before the first use.
