background image

!

GPS032

   

|  

Bicycle or Motorcycle Handlebar Mount and Water-Resistant Case for GPS

The Mobile Mounting Specialists™

®

Consumer Hotline:

USA

     (800) 841-0884

INT’L

    (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China

© Copyright 2010 Arkon Resources, Inc.

Package Contents:

(1) GN032-SBH - Bicycle or Motorcycle Handlebar Mount with 
swivel tightening ring
(1) GPS-WPCS - Bicycle / Motorcycle handlebar mount with
water-resistant GPS case. 
(1) Set Screw

Step 1.

Step 2.

Safety Precautions

Do not reposition the pedestal while cycling or driving.  Arkon 
Resources, Inc. does not promote the adjustment of mobile devices 
except when the bicycle or vehicle is safely parked or stopped. 

Arkon is not responsible for any damages caused to your bicycle, your 
device, or yourself due to the installation or use of this product.

!

Precaution:

 A set screw has been provided to be installed 

into the back side of the water resistant case to secure it to 
the handlebar pedestal. Ensure that the screw is properly 
installed to prevent the case from falling from the pedestal. 

Choose a safe location on the handlebars of your bicycle     
in which to mount the pedestal.

Using a screwdriver, remove the two mounting screws 

(A)  

in order to release the ball plate and swivel head 

(B) 

so the 

mount can be placed around the handlebars. Ensure the 
screw nuts 

(C)

 are not lost when loosening the screws.

Bicycle Handlebar Mounting

Wrap the rubber rings 

(D)

 around the handlebar and 

reassemble the ball plate and swivel head 

(E) 

around the 

rubber rings.  Secure the mount assembly by using the 
screwdriver to retighten the two mounting screws into the 
screw nuts 

(F)

 through the screw holes.  

Step 3.

GPS-WPCS
Water-resistant 
GPS Case

GN032-SBH
Bicycle or Motorcycle
Handlebar Mount

Step 5.

Step 4.

Snap the dual-T head adapter plate 

(K)

 onto the handlebar 

mount ball 

(L)

.  Adjust the angle as needed and screw the 

threaded tightening 

(M)

 ring onto the adapter plate until the 

plate is securely held in place.  

Connect the dual T-tabs 

(G)

 on dual T-tab adapter head to 

the dual T-slots 

(H) 

on the water-resistant GPS case. Insert 

the set screw 

(I)

 into the set screw hole 

(J)

 and screw in 

tightly to prevent the pedestal head from slipping off .

Connect Water-resistant GPS Case to Pedestal

B

A

C

C

A

M

K

L

G

H

J

I

Fits handlebars up to 33mm diameter. Compatible with most straight, drop, trekking, 
touring, and standard (25.4mm and 26mm) size handlebars. Also for use with golf carts, ATVs, 
snowmobiles, hang gliders or other apparatus having cylinder-shaped frames or posts.

Set Screw

D

E

F

F

Интернет-магазин автозвука и автотоваров Винавто

winauto.ua

Powered by TCPDF (www.tcpdf.org)

Reviews: