Arkon DHP380A User Manual Download Page 7

prongs on the transmitter cradle.    Depends on the capacity of the rechargeable battery to be used, 

the battery charging process will be around 5 to 7 hours. 

This device must be used with the AC/DC adaptor supplied in the package. 

 

WARNING: 

Never attempt to recharge conventional dry cells.

   

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, 

fire or the like.   

Never  use  another  type  of  battery  or  non-rechargeable  batteries  to  replace  the  rechargeable 

(LR03/AAA)  batteries  supplied.    When  the  headphones  are  not  in  use,  switch  it  OFF  to  avoid 

damaging the batteries. 

Excessive sound pressure from earphones and headphones can cause hearing loss. 

 

TROUBLE SHOOTING 

No Sound 

-

 

Ensure the AC/DC adaptor is fully inserted into the AC outlet and the power connection input on 

the transmitter. 

-

 

Ensure the headphone is switch ON. 

-

 

Headphone battery charge level may be too low, recharge the batteries fully. 

-

 

Ensure the TV or the connected audio device is switched ON. 

-

 

The volume of headphone may be too low, adjust the volume to a moderate level. 

-

 

The audio signal input level is too low. Increase the volume of the audio source. 

 

Distortion 

-    Ensure the volume level of headphone is set to an approximate level. 

The headphone is too far from the transmitter, move it closer. 

-    The audio signal input level is too low. Increase the volume of the audio source. 

 

TECHNICAL SPECIFICATIONS 

 

Transmission Mode  

UHF Stereo 

Carrier Frequency   

2.4GHz Digital 

Operation Voltage   

Transmitter, DC 5V 550mA 

Headphone, 2 x AAA size Rechargeable NiMH batteries (included) 

Frequency Response 

30Hz~ 20KHz 

Distortion 

 

 

0.5% 

S/N Ratio 

 

 

:   

75dB 

Operation Distance   

Up to 25 meters 

Operation Temperature      :            -10

°

C~+50

°

 

Summary of Contents for DHP380A











Reviews: