Plain Heat Press Manual
- 3 -
III. Operating Process
Turn on power switch, temperature
light is ON. The digital display shows
.
Press
button, the
light is
on (C denotes Celsius). Press
arrows “
△
” or “
▽
” to select “
℃
” or
“
℉
” (F denotes Fahrenheit)
according to your habits.
Press
button, the temp
light
is ON. Press Up “
△
” or Down “
▽
”
button to set temperature according
to different transfer material.
(Normally 180
℃
~200
℃
)
Note:
Temperature will be shown on
the controller only after it reached to
100
℃
,
it’s normal that there is no
temperature shows right after the
setting.
2. Set time required
Press
button after the
temperature setting and the
time light is ON. Press Up “
△
” or
Down “
▽
” button to set time
according to different transfer
material.
Press
button after time setting;
the display shows the temperature
starts to rise. “CD-L” shows the time
counting down during your transfer.
If there is a difference between the
actual temperature and temperature
shows on the controller, you can
use
P5 mode
to calibrate the
difference.
For example, when actual heat
platen temperature is 180 °C but the
display shows 200°C, press
button for 5 seconds to enter the P5
mode. When enter P5 mode,
press UP button
“△”
to set to -20,
and then press
button again
for 5 seconds return to operation
mode. In the contrast, when actual
heat platen temperature is 200 °C
but the display shows 180°C, press
