LED Strips Wiring
There are two families of digitally addressable LED strips, with 3 and 4 wires. The difference is only the
presence or not of a clock signal.
For the 3 wires familly you will need to connect a minimum of 2 wires: GND and Data.
For the 4 wires familly you will need to connect a minimum of 3 wires: GND Data and Clock.
Depending of your installation, you can either power the LED strips directly through the interface or you
can add one or more power supplies directly on the LED strips.
To power the LED strips through the interface you must connect the V+.
If you power directly the LED Strips, then you should not connect the V+.
Powering the LED Strips through the Kling-Force LED
This is the recommended way to drive LED Strips because it reduces the number of connections.
3