13
8. Troubleshooting
If you should encounter a problem, please follow the fault finding guide below. If the
fault cannot be rectified, please refer to Service.
Service Returns
If for any reason your
Flowtron Hydroven 3
is being
returned, please:
1. Clean the product following the instructions in
section “Decontamination” on page 10.
2. Enclose a covering letter explaining the reasons for
the return, with documentation (including an
appropriate decontamination certificate if possible).
3. To prevent damage in transport please pack the
pump in a suitably robust box.
If the trouble shooting procedures do not return the
system to normal performance, stop using the
system immediately and call the service engineer.
Fault
Check
Remedy
Pump does not
power up
Is power switch on?
Is power cord plugged in
correctly?
Fuse Blown
Check switch.
Check connections.
Call Service Engineer
Pump operates but
garment will not
inflate.
Blockage in garment
supply tube.
Garment not correctly fitted
to pump.
Pressure control set too
low.
Air leak in garment.
Ensure that the tube airway is
clear.
Check connections.
Increase pressure control.
Check garment. Replace if
defective.
Summary of Contents for FLOWTRON HYDROVEN 3
Page 1: ...FLOWTRON HYDROVEN 3 Instructions for Use with people in mind 0086 I 20 40 60 80 100 120 mmHg ...
Page 2: ......
Page 4: ... ii ...
Page 26: ...20 ...
