Arjohuntleigh alpha trancell deluxe, Instructions For Use Manual, Page: 18 / 28

12
Transport Mode
The transport facility is located on the tubeset near the
pump. The patient may be transported on the
Alpha
Trancell Deluxe
systems as follows:
1. Turn the control knob 90 degrees as shown below.
2. Remove the tubeset from the pump.
3. Switch the pump to Standby.
The pressure in the two sets of cells will equalise and the
patient continues to be supported (with the mattress
static) for 1 - 2 hours with the patient in the supine
(lying) position.
Normal Mode
To return to normal alternating mode, push the tubeset
onto the pump, make sure the pump is switched on and
then turn the control knob 90 degrees counter-clockwise
so that the arrows align with the tubeset.

To obtain the maximum use of the transport facility ensure that the patient
remains in the supine position and the mattress is put in transport mode when
all cells are inflated.
Stopping Therapy To stop the therapy, switch the pump to the Standby ( )
position.
• To completely isolate the pump from the mains,
remove the plug from the mains power socket.
IMPORTANT
• The Transport facility is fitted to the Alpha Trancell Deluxe
mattress replacement and the mattress overlay only.
• There is no Transport facility on the Alpha Trancell Deluxe seat
cushion.