manualshive.com logo in svg

Arjohuntleigh alpha active 4, Instructions For Use Manual, Page: 26 / 32

Share
Download
Arjohuntleigh alpha active 4 Instructions For Use Manual Download Page 26

20

* 

For additional flammability testing standards, refer to individual product law tags 

**

Chlorine concentrations may vary from 250ppm to 10,000ppm depending on local policy and contamination status. If 

an alternative disinfectant is selected from the wide variety available, ArjoHuntleigh recommend that suitability for use 
is confirmed with the chemical supplier prior to use.

COVER SPECIFICATION

Feature

Reliant IS

2

Removable Cover

Yes

Moisture Vapour Permeable

Low

Low Friction

No

Water Resistant / Repellent

Yes

Polyurethane coating includes an 
antifungal agent to control microbial 
deterioration of fabric

Yes

Fire Retardant

*

BS 7175: 0,1 & 5

2-Way Stretch

Yes

Recommended Wash Temperatures

60°C (140°F) 15 min.

Maximum Wash Temperatures

Max 95°C (203°F) 15 min.

Recommended Drying Temperatures

60°C (140°F) or air dry

Maximum Drying Temperatures

Max 80°C (176°F)

Wipedown Chemicals

**

Chlorine at strength of 1000ppm or Alcohol at 70% concentration; no 
phenol; ensure product is dry before storage

Summary of Contents for alpha active 4

































Reviews:

No comments