Arjohuntleigh Alpha Active 3, Instructions For Use Manual

Page: 20 / 174

10
Transport Mode
To transport a patient using the
Alpha Active 3
mattress
overlay, disconnect the tube-set from the pump and
place the attached cap over the end of the tubeset to put
the mattress into transport mode. This will automatically
switch the mattress into transport mode.
The patient will remain supported by the mattress for up
to 12 hours.
To resume normal operation, simply reconnect the tube-
set and run the pump.
To Deflate and Store the Alpha Active 3 Mattress
To deflate the mattress:
1. Disconnect the tube-set from the pump.
2. Activate the CPR control to deflate the mattress.
To store the mattress
Following deflation:
1. Bring the tubeset over the mattress to lie parallel to
the foot end of the mattress.
2. Roll the mattress from the foot end toward the CPR
connector at the head end of the mattress.
Caution
Transport mode is non-therapeutic offering support only for up to
12 hours. It is recommended that when in transport mode the
patient is frequently monitored.