background image

001-1

1900-EN rev

. 5

Foreword

2

Foreword

Thank you for choosing 

Arjo products.

Your KWIKtrak™ Semi-Permanent Rack is part of 

a series of quality products designed specially for 

home care, nursing homes and other health care 

uses.
We are dedicated to serving your needs and 

providing the best products available along with 

training  that  will  bring  your  staff  maximum  benefit 

from every Arjo product.
If a serious incident occurs in relation to this medical 

device, affecting the user, or the patient then the 

user or patient should report the serious incident 

to the incident to the medical device manufacturer 

or  the  distributor.  In  the  European  Union,  the 

user should also report the serious incident to the 

Competent Authority in the member state where 

they are located.

Please Read this Manual Thoroughly!

The information in this manual is crucial to the proper 

use and maintenance of the 

Semi-Permanent Rack. 

It will help protect your product as well as ensure 

that it performs to your satisfaction.
Lifting and transferring a person always presents a 

potential risk. This manual contains safety related 

information that must be read and understood to 

help prevent injuries.

WARNING

: Arjo strongly advises and warns 

that to avoid injuries that can be attributed to the 

use of inadequate parts, only parts designated 

by Arjo should be used on product and other 

appliances supplied by Arjo.

WARNING

: Unauthorized modifications on any 

Arjo product may affect its safety. Arjo will not be 

held responsible for any accidents, incidents or 

lack of performance that occur as a result of any 

unauthorized modification to its products.

The equipment must be installed in accordance with 

these safety instructions.
Anyone installing the equipment must also have 

read and understood the instructions in this manual.
If there is anything you are not sure about, contact 

the local Arjo representative.
Do not attempt to service or repair the 

Semi-Permanent Rack

. If any item is defective, 

contact your local Arjo vendor.

Service and Support

A service routine must be done on your 

Semi-Permanent Rack

 by Arjo trained service 

personnel. This will ensure it remains safe and 

functional.
Please contact your local Arjo vendor for any of the 

following:

•  If you require further information.
•  If you want to report an unexpected event, 

change in the performance or a malfunction.

•  If you need any help in setting up, using or 

maintaining your 

Semi-Permanent Rack.

•  If you need replacement parts

.

Your Arjo vendor can offer support and service 

programs to maximize the long-term safety, reliability 

and value of the product.
Additional copies of this manual can be purchased 

from your local Arjo agent. When ordering, include 

the 

Instructions for Use 

part number (see front 

page). 

Manufacturer Information

This product was manufactured by:
ArjoHuntleigh AB 

Hans Michelsensgatan 10 

211 20 Malmö, Sweden

  

: +46 (0) 10-335 45 00 

 

 

: +46 (0) 413-138 76 

 

ü 

: www.Arjo.com

Definitions Used in this Manual

WARNING

Means: Failure to understand and follow this 

instruction may result in injury to yourself and others.

CAUTION

Means: Failure to follow this instruction may cause 

damage to the product(s).

NOTE

Means: Important information regarding correct use 

of the product.

Summary of Contents for KWIKtrak 700.11900





















Reviews: