Arizona Hansa Brandenberg W.29, Assembly And Historical Information

Page: 30 / 34

Typical set up for a working cockpit
Shown in the illustration is the layout
for an Albatross D.III
Specific cockpit details for your model will vary
but the basic principal works for most all early aircraft.
http://ArizonaModels.com
Send your ideas and photos to::
Make instrument bodies from
rolled strips of aluminum lithoplate
or strips of manila folder paper.
Paint the inside flat black to finish.
Brass or aluminum tube sections
can be substituted for the lithoplate
however the edges of the laser cut
parts will need to be sanded to reduce
the diameter slightly. Use bent wire
or pins painted white to simulate the
dial indicators.
Assemble with white glue only CA will
fog the plastic.
Instrument Body Assembly
Lense Face
Aluminum or
Paper Tube Wire Support
Paint White