Please read these instructions carefully
before using the equipment
EARTHING
This appliance must be earthed. If it should malfunction or break down,
earthing
provides a path of least resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an equipment- earthing
conductor and earthed plug. The plug must be inserted into an appropriate outlet that
is properly installed and earthed in accordance with all local codes and legislation.
ELECTRIC SHOCK HAZARD
Improper connection of the equipment grounding conductor can
result in the
risk of electric shock.
+
Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded.
+
Use only a 3-wire extension cord that has a 3-blade earthing plug and a
3-slot receptacle that accepts the plug on the product.
+
An undersized cord results in a drop in line voltage and loss of power
and overheating.
+
Do not modify the plug provided with the appliance. If it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
+
To reduce the risk of electric shock or injury, do not expose to rain.
+
Never allow unit to freeze.
+
Always store the unit inside in a dry location. Store on the floor if in a
basement setting.
+
The operator must wear shoes and the floor must not be wet.
QTech
HVLP Turbine
4
FIRE & EXPLOSION HAZARD
This QTech HVLP Turbine must not be used in an area contaminated by volatile
or flammable materials since sparking can be expected in the normal operation
of the motor. This could ignite the contaminants causing a dangerous explosion.
+
Do not spray flammable or combustible materials near an open flame or
sources of ignition such as cigarettes, motors, and electrical equipment.
+
Keep spray area well-ventilated. Keep a good supply of fresh air moving
through the area. Keep turbine in a well ventilated area.
+
Do not spray turbine.
+
Turn off and disconnect power cord before servicing equipment.
+
Do not smoke in the spray area.
+
Do not operate light switches, engines, or similar spark producing products
in the spray area.
+
Keep area clean and free of paint or solvent containers, rags, and other
flammable materials.
+
Fire extinguisher equipment shall be present and working.
+
Sprayer generates sparks. When flammable liquid is used in or near the sprayer
or for flushing or cleaning, keep sprayer at least 6 m away from explosive
vapours or spraying area.
+
Ensure ground prongs are intact on sprayer and extension cords.
+
Always disconnect unit from main supply when filling the paint container.
+
Never use 1,1,1-trichloroethane, methylene chloride, other halogenated
hydrocarbon solvents or fluids containing such solvents in equipment with
aluminum wetted parts. Such use could result in a serious chemical reaction,
with the possibility of explosion. Consult your fluid suppliers to ensure that the
fluids being used are compatible with aluminum parts.
Aristospray
.com
5
