Ariston MB 91 AUS, Instructions For Installation And Use Manual, Page: 11 / 12

10
447
mm
78
78
min.
550
mm
52
472
mm
475
mm
860
mm
22
mm
895
mm
525
mm
469
mm
850
mm
Installation
Important: The power supply to the appliance must be
cut off before any adjustments or maintenance work is
done on it.
Installation of Built-in Ovens
To ensure the proper working order of the built-in
appliance, the kitchen unit must be of a suitable size.
The sizes of the unit for installing the cooker under a
worktop or in a column unit are shown in figure.
min. 45 mm.
To provide adequate ventilation, there must be appropriate
ventilation openings in the front bottom and the top part of
the cabinet (an intake opening on the bottom of at least
200 cm
2
, and an exhaust opening of at least 60 cm
2)
.
The unit panels next to the cooker must be heat resistant.
In the case of veneered wood units, glues must be resistant
to a temperature of 120 °C.
In accordance with safety standards, once the appliance
has been mounted, there must be no possible contact
with electrical parts. Any protective parts must be secured
so that they can only be removed with the use of tools.
Fastening the oven
Insert the appliance into the compartment; open the
oven door and fasten the oven to the cabinet using
the four screws “A”, remembering to place the special
spacers provided between the hole and the screw
itself.
Electric connection
Cookers with a three-pole power supply cable are
designed to operate with alternated current at the supply
frequency and voltage indicated on the data plate (at the
bottom of the oven dashboard). The earthing conductor
of the cable is the yellow-green conductor.
Technical Specifications
Oven size
width
cm. 54
depth cm. 38
Height cm. 33
Powers supply: 240V 230V
- Static oven: 2550W 2350W
- Lower heating element: 1400W 1300W
- Upper heating element: 1150W 1050W
- Grill: 2200W 2000W
- Maxigrill: 3350W 3050W
- Ventilated Maxigrill: 3350W 3050W
- Gentle pastry oven: 1400W 1300W
- Ventilated oven: 3050W 2800W
Electric oven size: litres 68
Voltage end frequency: 230-240V / 50Hz
Power supply Max: 3400W(240V)- 3100W(230V)
A
A
A
A
30
15 45
100
150
200
250
50
F A
Connecting the power supply cable to the mains
The appliance must be directly connected to the mains
using an omnipolar circuit-breaker with a minimum
contact opening of 3 mm installed between the appliance
and the mains, suitable for the load indicated and
complying with current directives (the earthing wire must
not be interrupted by the circuit-breaker).
The power supply cable must be positioned so that it does
not exceed 50°C more than room temperature at any point
of its length.
Before making the connection check that:
l
the limiter valve and the home system can support the
appliance load (see data plate);
l
the power supply system has an efficient earthing
connection which complies with the provisions of
current regulations;
l
the socket or omnipoar circuit-breaker is easily
accessible once the cooker has been installed.
NOTE: do not use reducers, adaptors or shunts as they
could cause overheating and burns.