21
BO0299-020
4
1 Lower heating element
2 Upper heating element
3 Magnesium anode
4 Boiler
5 Flange
6 Safety thermostat probe
7 Changeover switch thermostat
probe
8 Operational thermostat probe
Mod
MPa
W
V~
M a d e i n I T A L Y
5 0 / 6 0 H z
I P 2 5 D
For the technical characteristics please refer to the data on the rating plate.
TECHNICAL CHARACTERISTICS
3
3.1 R
ATING PLATE DATA
Model
Maximum running
pressure
Absorbed power
Feed voltage
Mains frequency
Protection level
Date of manufacture
Capacity
Boiler protection
Intensity of current
The upper heating element 2
enables only a limited amount
of water (H) to be heated.
This system gives you a smaller
amount of hot water (about
20 ÷ 30% of the total capacity)
in a shorter time thus reducing
consumption.
Use the “BOOSTER” key for
this function.
The temperature in area H is preset to the maximum thermostat temperature setting
and is controlled by means of the changeover switch thermostat probe 7. When normal
running operations are set (“NORMAL” total heating), the lower water heating element 1
switches on so that all the water inside the appliance is heated (H+L).
Water temperature is controlled by the operational thermostat 8 according to the position
of the adjustment knob (fig. 5).
8
7
6
H
L
2
8
1
5
3
