background image

GB

6

Running a wash cycle

NOTE:

  the  first  time  you  use  the  washing  machine,

add detergent and run an empty 90°C cotton wash

cycle  without  the  pre-wash  phase.

1.

SWITCH ON THE MACHINE.

 

Press the 

button. All the indicator lights will illuminate for 1

second, after which the light corresponding to the

 button will remain lit constantly, while the

START/PAUSE indicator light will flash slowly.

2.

LOAD  THE  LAUNDRY.

  Open  the  porthole  door.

Load  the  laundry,  making  sure  that  the  maximum

load quantity indicated in the table of programmes

(below) is not exceeded.

3.

MEASURE  OUT  THE  DETERGENT.

 Pull out the

drawer  and  pour  the  detergent  into  the  relevant

compartments as described in “

Description of the

machine

”.

4.

CLOSE  THE  PORTHOLE  DOOR.

5.

CHOOSE  THE  PROGRAMME.

  Turn  the

PROGRAMME  knob  left  or  right  to  select  the

required  programme,  to  which  a  set  temperature

and spin speed are linked (these values may all be

modified).

6.

PERSONALISE  THE  WASH  CYCLE. 

Use  the

relevant  buttons  on  the  control  panel:

 

 

Modify the temperature and/or the

spin  speed.

 

The  machine  automatically  selects

the temperature and the maximum spin speed for

the programme set and these values may not be

increased.  By  pressing  the 

  button,  the  tempe-

rature can be progressively reduced or even set to

cold wash  . By pressing the   button, the spin

speed can be progressively reduced or even

eliminated altogether  . If the buttons are pressed

again  the  maximum  values  are  restored.

 

Exception: if the WHITE COTTON programme is

selected,  the  temperature  can  be  increased  up  to

a value of 90°C.

 Setting a delayed start.

To set the "delayed start" option for the program you

have selected, press the button until the indicator

light for the desired delay time is illuminated.

On pressing the button four times, this function will

deactivate.

N.B.: 

once the START/PAUSE button is pressed

the "delayed start" indicator light will flash

(the time delay value may only be changed by

decreasing  the  time).

 

 

 

 

Modify the cycle caracteristics.

Press the OPTION buttons to personalise the wash

cycle  according  to  your  own  requirements.

• Press  the  button  to  activate  the  option;  the

corresponding indicator light will illuminate.

• Press the button again to deactivate the option;

the indicator light will switch off.

 If the selected option is not compatible with the

set programme, the indicator light will flash and the

option will not be activated.

 

If the selected option is not compatible with

another previously selected option, the indicator

light corresponding to the first option will flash and

only the second option will be activated (the

corresponding indicator light will remain lit in a fixed

manner).

7.

START THE PROGRAMME.

 Press the START/

PAUSE button. The corresponding indicator light

remains lit in a fixed manner and the porthole door

locks  (the  DOOR  LOCK  indicator  light  illuminates).

The icons corresponding to the different wash

phases will light up during the cycle, indicating the

progress. To change a programme while a cycle is

in progress, 

pause the washing machine 

by

pressing  the  START/PAUSE  button;  then  select  the

desired cycle and press the START/PAUSE button

again.

To open the door while a cycle is in progress press

the START/PAUSE button; if the DOOR LOCK 

indicator light switches off it is possible to open the

door. Press the START/PAUSE button again to

restart the programme from the point at which it

was  interrupted.

8.

PROGRAMME END.

 

The text END lights up to

indicate  that  the  programme  has  ended.  The

porthole door may be opened immediately. If the

START/PAUSE button flashes, press the button to

end the cycle. open the door, unload the laundry

and  switch  off  the  machine.

 If you wish to cancel a cycle that has already

begun, press and hold the   button. The cycle will be

stopped and the machine will switch off.

BAG FOR QUILTS, CURTAINS AND DELICATE

GARMENTS

Ariston has made it easier for you to wash even the

most  valuable  and  delicate  garments  in  complete

confidence  thanks  to  the  special  bag  which  protects

the laundry (this is supplied with the machine).
We recommend that the bag is used every time you

wash 

quilts and padded items with an outer layer

made using synthetic material.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for AQXL 85













Reviews: