AUS
7
Wash options
Super Wash
This option offers a high-performance wash due to the
greater quantity of water used in the initial phase of the
cycle, and due to the increased wash cycle duration, is
particularly useful for the removal of stubborn stains. It
can be used
with
or
without
bleach. If you desire
bleaching, insert the extra
tray compartment (
3
) into
compartment
1
. When
pouring in the bleach, be
careful not to exceed the
max level marked on the
central pivot
(see figure).
To bleach laundry without
carrying out a full wash
cycle
,
pour the bleach into
the extra compartment
3
, select the "Rinse" cycle
and activate the "Super Wash" option .
It cannot be used in conjunction with
, ,
,
, ,
, , , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum
will rotate slowly;
the Easy Iron and START/PAUSE
indicator lights will flash. To end the cycle press the
START/PAUSE button or the Easy Iron button.
For the
Silk
wash cycle, the machine
will end the
cycle while the laundry is soaking
and the Easy Iron
indicator light will flash. To drain the water so that the
laundry may be removed, press the START/PAUSE
button or the Easy Iron button.
It cannot be used in conjunction with
, , , , , .
Steam Hygiene
This option enhances washing performance by
generating steam during the wash cycle that eliminates
any bacteria from fibres while treating them at the same
time. Place the laundry in the drum, choose a
compatible programme and select option "
".
The steam generated during washing machine
operation may cause the porthole door to become hazy.
It cannot be used in conjunction with
,
(90°C),
,
,
,
, , , , , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is
used with a full load of washing, or when a large amount
of detergent is required.
It cannot be used in conjunction with
, , , .
Wash cycles and options
Table of wash cycles
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
(*)
The
duration
of
the
wash
cycles
can
be
checked
on
the
display
.
Icon Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Detergent
for wash
Fabric
softener
Bleach
Cottons wash cycles
Cotton
with pre-wash
(Add detergent to the relevant compartment).
90°
1200
l
l
-
8
Cotton (1):
normal soiled whites and colours.
60°
(Max. 90°) 1200
l
l
l
8
Cotton (2):
heavily soiled whites and delicate colours.
40°
1200
l
l
l
8
Coloured
Cotton (3)
40°
1200
l
l
l
8
Shirts
40°
600
l
l
l
2
Jeans
40°
800
l
l
-
4
Special programmes
Baby:
heavily soiled delicate colours
40°
800
l
l
l
4
Durable
Synthetics
60°
800
l
l
l
4
* Steam Refresh
(see previous page)
-
-
-
-
-
1,5
"Bed & Bath"
for bedlinen and towels.
60°
1200
l
l
l
8
Duvets:
for down-stuffed garments.
30°
1000
l
l
-
3,5
Silk:
for garments in silk and viscose, lingerie.
30°
0
l
l
-
2
Wool:
for wool, cashmere, etc.
40°
600
l
l
-
2
Mix 30':
to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30°
800
l
l
-
3,5
Partials wash cycles
Rinse
-
1200
-
l
l
8
Spin
-
1200
-
-
-
8
Drain
-
0
-
-
-
8
3
1
2
For all Test Institutes:
1) Test wash cycle in compliance with regulation AS/NZS 2040.2: set program cotton ; with a temperature of 60°C; load of 8kg at 1200 rpm.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
