background image

AUS

8

WARNING:

 before you use the washing machine for the 

first time, run a wash cycle with detergent and no laundry, 
using the 90° cottons cycle without pre-wash.

1. 

SWITCH THE MACHINE ON.

 Press the   button. 

All the indicator lights will illuminate for 1 second; the 
indicator light corresponding to the   button will then 
remain lit in a fixed manner and the START/PAUSE 
indicator light will flash slowly.

2. 

LOAD THE LAUNDRY

. Open the porthole door. 

Load the laundry, making sure you do not exceed the 
maximum load value indicated in the table of wash 
cycles on the following page.

3. 

MEASURE OUT THE DETERGENT.

 Pull out the 

detergent dispenser drawer and pour the detergent into 
the relevant compartments as described in 

“Description 

of the machine”.

4. 

CLOSE THE PORTHOLE DOOR.

5. 

SELECT THE PROGRAMME.

 

Turn the WASH CYCLE 

SELECTOR KNOB right or left, until you have selected 
the desired wash cycle. A temperature and spin speed 
is set for each wash cycle; these may be adjusted.

6. 

CUSTOMISE THE WASH CYCLE. 

Use the relevant 

buttons on the control panel:

 

 

 

Modify the temperature and/or spin speed.

  The machine automatically displays the maximum 

temperature and spin speed values set for the selected 
cycle, or the most recently-used settings if they are 
compatible with the selected cycle. The temperature can 
be decreased by pressing the 

 button, until the cold 

wash ( ) setting is reached. The spin speed may be 
progressively reduced by pressing the 

 button, until it 

is completely excluded ( ). If these buttons are pressed 
again, the maximum values are restored. 

!

 

Exception: if the

 

 programme is selected, the 

temperature can be increased up to a value of 90°C.

 

 

Set a DELAY TIMER.

  To set the “DELAY TIMER” option for the program you 

have selected, press the button until the indicator light 
for the desired delay time is illuminated. 

  On pressing the button six times, this function will 

deactivate. 

 

Once the START/PAUSE button has been pressed, the 

time delay may only be decreased.

 

 

   

 

Modify the cycle settings.

  Press the OPTION buttons to customise the wash cycle 

in accordance with your own requirements.

  • Press the button to activate the option; the 

corresponding indicator light will switch on.

  • Press the button again to disable the option; the 

indicator light will switch off.

 

!

 If the selected option is not compatible with the 

selected wash cycle, this incompatibility will be signalled 
by the flashing of the indicator light and a sound alert  
(3 beeps); the option will not be activated.

 

!

 If the selected option is not compatible with another 

option that has been selected previously, the indicator 
light corresponding to the first option selected will 
flash and only the second option will be activated; the 
indicator light corresponding to the button will remain lit 
in a constant manner.

7. 

START THE PROGRAMME.

 Press the START/PAUSE 

button. The corresponding indicator light remains lit in a 
fixed manner and the porthole door locks (the   LOCK 
indicator light illuminates). The icons corresponding to 
the wash cycle phases will light up during the cycle to 
indicate which phase is currently in progress.

  To change a wash cycle once it has already started, 

pause the washing machine by pressing the START/
PAUSE button; then select the desired cycle and press 
the START/PAUSE button again.

  To open the door during a wash cycle, press the START/

PAUSE button; if the LOCK   indicator light is switched 
off you may open the door. Press the START/PAUSE 
button again to restart the wash cycle from the point at 
which it was interrupted.

8. 

THE END OF THE WASH CYCLE.

 This is indicated 

by the illuminated text 

END

. The porthole door may be 

opened immediately. If the START/PAUSE indicator light 
is flashing, press the button to end the cycle. Open the 
door, unload the laundry and switch off the machine.

!

 If you wish to cancel a cycle which has already begun, 

press and hold the   button until the cycle stops and the 
machine switches off.

Bag for quilts, curtains and delicate garments

The Aqualtis washing machine makes it easier for you 
to wash even the most valuable and delicate garments 
in complete confidence thanks to the special bag which 
protects the laundry (this is supplied with the machine). 
We recommend that the bag is used every time you 

wash 

quilts and padded items with an outer layer made 
using synthetic material.

Running a wash cycle

Summary of Contents for AQUALTIS AQ82L 29













Reviews: