Ariston A1200WD Instruction Booklet Download Page 7

7

Functions

To enable a function:
1. press the button corresponding to the desired 

function, according to the table below.

2. the function is enabled when the corresponding 

LED is illuminated.

The rapid flashing of the button indicates that the 
corresponding function cannot be selected for the 
programme set. 

Setting the temperature

Turn the TEMPERATURE knob to set the wash 
temperature 

(see Programme table)

.

The temperature can be lowered, or even set to cold
wash      .

Setting the spin speed

Models A1600 and A1400 only:

Use the ‘Reduced Spin’ Option button, to reduce 
programme spin speed to 1000rpm (cottons 
programmes).
The maximum spin speeds for each programme are
as follows:

Programmes 

Maximum spin speed

Cottons

1600rpm - Model A1600WD
1400rpm - Models A1400SWD 

and A1400WD

1200rpm - Model A1200WD

Synthetics

800rpm

Wool

600rpm

Silk

no

Personalisation

Function

Effect

Comments

Enabled with
programmes

All programmes
(Models
A1600WD,
A1400SWD and
A1400WD only)

Delay Timer

Delays the start
of the wash by
up to 9 hours.

Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the START/RESET button, the
delay can only be decreased if you wish to modify it.

1, 2, 3, 6, 7.

Super Wash

Allows for an
impeccable wash,
visibly whiter than
a standard 

Class

A

wash.

This function is incompatible with the RAPID function.

1, 2, 3, 6, 7.

Rapid

Cuts the duration
of the wash cycle
by 30%.

This function is incompatible with the SUPER WASH function.

All programmes
except for 1, 2,
4, 8, 9, 10 and
Draining
(Model
A1200WD only)

Easy Iron

This option
reduces the
amount of 
creasing on 
fabrics, making
them easy to iron.

When this function is set, programmes 6, 7, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED     will flash.
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the relative
symbol      and press the START/RESET button.

1, 2, 3, 4
(Models
A1600WD,
A1400SWD and
A1400WD only)

Reduced Spin

Reduces the final
spin speed to
1000rpm

Reduces the final spin speed on cotton programmes.

1, 2, 3, 4, 6, 7.
(Model
A1200WD only)

Extra Rinse

Adds one extra
rinse cycle.

Remember - you will use more water than with a standard
cycle.

GB

Summary of Contents for A1200WD

















Reviews: