UK
22
Press the ON/OFF button, select an operating mode using the MODE button
and set the desired temperature.
Press the
SLEEPING
button and the symbol will come up on the display
screen.
The
SLEEPING
function adjusts the temperature automatically in order to make
the room more comfortable at night.
In cooling or dehumidification mode, the temperature set is gradually increased
by 2°C during the first two hours of operation. In heating mode, the temperatu-
re set is gradually decreased by 2°C during the first two hours of operation.
Together with the
SLEEPING
, function, a timed stopping can be programmed
up to a maximum of 24 hours by pressing the TIMER OFF button (see timed
stopping paragraph).
In the example on the right, the “SLEEPING” function has been enabled (in
COOLING mode) with timed stopping.
N.B.: IN “SLEEPING” function, you can only programme the “TIMER OFF”
timed stopping.
Press the
FAN SPEED
button to choose the fan speed from:
(low), (medium), (high) or
AUTO FAN
, once the cooling and heating
modes have been selected.
In AUTO mode, the electronic control chooses the operating mode ( - )
and the fan speed. This function automatically increases the speed of the fan if
a greater cooling or heating effect is required.
FAN FAN SPEED SETTING
Press the ON-OFF button on the remote control. Press the MODE button to
select the ventilation mode, the symbol will come up on the display screen.
This mode circulates air throughout the room.
Press the FAN
SPEED
button to choose the fan speed from:
(low), (medium), (high) or
AUTO FAN.
If you select the
AUTO FAN
speed, the electronic control chooses the fan
speed automatically.
VENTILATION MODE
SLEEPING FUNCTION
HEATING
(only for models with a heat pump)
Press the ON-OFF button on the remote control. Press the MODE button to
select the heating mode, the symbol will come up on the display screen.
In this mode, the air conditioning unit heats the room by means of the “heat
pump” operation. In fact, in this mode, the room is heated using the heat con-
tained in the outside air at a low temperature.
For the heating cycle to start, set a temperature above the room tem-
perature using the “TEMP UP/DN” buttons.
The appliance regulates the compressor’s operation cycles automati-
cally in order to keep the room at the desired temperature.
Example: if the temperature in the room is 18° C, you should set a tem-
perature above or equal to 19° C for the compressor to start and hea-
ting to begin.
Summary of Contents for A-DW07-HBX
