M
ARGHERITA
Margherita - Instructions for installation and use
11
Removing the plug:
If your appliance has a non-
rewireable moulded plug and you
should wish to re-route the mains
cable through partitions, units
etc., please ensure that either:
the plug is replaced by a fused
13 ampere re-wearable plug
bearing the BSI mark of approval.
or:
the mains cable is wired directly
into a 13 amp cable outlet,
controlled by a switch, (in
compliance with BS 5733) which
is accessible without moving the
appliance.
Disposing of the plug:
Ensure that before disposing of
the plug itself, you make the pins
unusable so that it cannot be
accidentally inserted into a
socket.
Instructions for connecting
cable to an alternative plug:
Important:
the wires in the
mains lead are coloured in
accordance with the following
code:
Green & Yellow
Earth
Blue
Neutral
Brown
Live
As the colours of the wires in the
lead may not correspond with the
coloured markings identifyng the
terminals in your plug, proceed
as follows:
Connect Green & Yellow wire to
terminal marked
E
or or
coloured Green or Green &
Yellow.
Connect Brown wire to terminal
marked
L
or coloured Red.
Connect Blue wire to terminal
marked
N
or coloured Black.
If a 13 amp plug (BS 1363) is used
it must be fitted with a
13 amp fuse, either in the plug
or adaptor or at the distribution
board.
If you are in any doubt the
electrical supply to your
machine, consult a qualified
electrician before use.
How to connect an alternati-
ve plug:
The wires in this mains lead are
coloured in accordance with the
following code:
BLUE
NEUTRAL
(N)
BROWN
LIVE (L)
GREEN & YELLOW
EARTH (E)
Disposing of the appliance:
When disposing of the appliance
please remove the plug by
cutting the mains cable as close
as possible to the plug body and
dispose of it as described above.
GREEN &
YELLOW
BROWN
BLUE
13 ampere fuse
CROSS-BAR
CORD GRIP
All manuals and user guides at all-guides.com
