O-235E | 3 - Access Point Overview | 10
Console
Establish ‘config shell’ terminal session via serial
connection
RJ-45
•
RS 232 Serial (115200
bits per second)
•
Data bits:8; Stop bits: 1
•
Parity: None
•
Flow Control: None
USB
USB 2.0 port
USB
Future Use
Reset
Reset to factory default settings port. Hold down and power
cycle the device to reset.
Pinhole push
button
N/A
When you reset the AP, the following settings are reset:
•
Config shell password is reset to config.
•
Server discovery value is erased and changed to the default,
redirector.online.spectraguard.net (primary) and wifi-security-server (secondary).
•
All the VLAN configurations are lost.
•
If a static IP is configured on the AP, the IP address is erased and DHCP mode is set. The
factory default IP address of the AP is 169.254.11.74.