Quick Start Guide: 7300 Series Modular Data Center Switches
27
Chapter 5
Connecting Serial and Management
Cables
5.1
Connecting Supervisor Cables
Supervisor modules contain console, management, and USB ports.
displays port locations
on 7300 Series Modular switch supervisors.
Figure 5-1: Supervisor Ports
•
Console (Serial) Port:
Connect to a PC with RJ-45 to DB-9 serial adapter cable. Default switch
settings include:
•
9600 baud
•
No flow control
•
1 stop bit
•
No parity bits
•
8 data bits
•
Ethernet management port:
Connect to 10/100/1000 management network with RJ-45 cable.
•
USB Port:
May be used for software or configuration updates.
•
Clock Input Port:
Port type is MCX connector, 2-5.5V, 50 ohm termination.
