3 Access Point Overview
Port
Description
Connector Type
Speed/Protocol
Console
Establish ‘config shell’
terminal session via
serial connection
RJ-45
•
RS 232 Serial
(115200 bits per
second)
•
Data bits:8; Stop
bits: 1
•
Parity: None
•
Flow Control: None
Reset
Reset to factory default
settings port. Hold
down and power cycle
the device to reset.
Pinhole push button
N/A
Power
12V DC
5.5 mm overall
diameter / 2.1 mm
center pinhole
N/A
When you reset the AP, the following settings are reset:
•
Config shell password is reset to config.
•
Server discovery value is erased and changed to the default, redirector.online.spectraguard.net
(primary) and wifi-security-server (secondary).
•
All the VLAN configurations are lost.
•
If a static IP is configured on the AP, the IP address is erased and DHCP mode is set. The factory
default IP address of the AP is 169.254.11.74.
5
