Mounting Instructions using the Silhouette or Interlude Bracket Mount
The Silhouette/Interlude mounting bracket is not a part of the standard package and must be procured separately.
The mounting instructions for the Silhouette/Interlude Bracket Mount are very similar to the Standard Package
Content's mounting instructions. Refer to the instructions mentioned in
Mounting Instructions using the Standard
on page 11 .
Power the Access Point On
The C-130E device can be powered on by plugging one end of the Ethernet cable into the PoE+ (802.3at) switch
or injector and the other end into the Ethernet/PoE+ port on the C-130E. Ensure the PoE+ source you are using
is turned ON.
Note: You can also use regular PoE (802.3af). However, there are certain drawbacks to it:
• The USB is disabled.
• The other ethernet port is disabled.
• The 2.4 GHz radio is downgraded to 1x1 TX/RX capability and Tx power of 15 dBm or lower, (or as set in
the device template)
• The 5 GHz radio is downgraded to 2x2 18 dBm or lower, (or as set in the device template)
As an alternative to PoE+, you can insert a power adaptor plug into an AC power outlet and the other end into
the power input port on the C-130E.
C-130E
14
