Mounting Instructions using the Silhouette/Interlude Bracket Mount
The Silhouette/Interlude mounting bracket is not a part of the standard package and must be procured separately.
The mounting instructions for the Silhouette/Interlude Bracket Mount are very similar to the Standard Package
Content's mounting instructions. Refer to the instructions mentioned in
Mounting Instructions using the Standard
on page 11.
Mounting Instructions using the Wall Mount Bracket
The Wall mounting bracket is not a part of the standard package and must be procured separately. Attach the
wall-mounting bracket with the help of screws on to the wall. Pull the side latch to unlock the wall mount bracket.
Affix the device on the wall mount bracket by placing the device stubs in the bracket's placeholder. Lock the
side latch and affix the device firmly with the screw.
Power the Access Point On
The C-130 device can be powered on by plugging one end of the Ethernet cable into the PoE+ (802.3at) switch
or injector and the other end into the Ethernet/PoE+ port on the C-130. Ensure the PoE+ source you are using
is turned ON.
Note: You can also use regular PoE (802.3af). However, there are certain drawbacks to it:
13