Chapter 3. C-120 Overview
C-120 is a 4x4 802.11a/b/g/n/ac access point with two radios.
This chapter provides an overview of the C-120 and describes:
•
•
Rear Panel Ports on C-120 (page 5)
•
Top Side Ports on C-120 (page 6)
Front Panel of C-120
The front panel of the C-120 has 4 functional LEDs that indicate the working of the device.
The following table indicates the device states based on the LEDs.
LED Status
Power/Ethernet
Wi-Fi 2.4GHz
Wi-Fi 5GHz
What does it mean?
Solid Orange
Any
Any
The AP does not have an active
ethernet link.
Fast Blink Green
Any
Any
The AP did not receive a valid IP
address via DHCP.
Slow Blink Green
Any
Any
The AP is unable to connect to the
Wireless Manager.
Slow Blink Orange
Any
Any
The AP is being upgraded.
For basic troubleshooting of the issues based on the LED status, refer to the
C-120 Troubleshooting (page 12)
section.
Rear Panel of C-120
The rear panel of the C-120 provides an PoE+ Ethernet port that enables you to connect the device to a wired LAN through a
switch or a hub and power the device by using the 802.3af/802.3at standard.