manualshive.com logo in svg

Arista ARP-2215AP-G00, User Manual

Share
Download
Arista ARP-2215AP-G00 User Manual Download Page 35

35

CPU Configuration

Scroll to this item and press <Enter> to view the following screen:

CPU Ratio

Use this to change the ratio value of this motherboard.

Intel SpeedStep Technology

Intel SpeedStep technology is Intel’s new power saving technolo-gy. Processors can switch between
multiple frequencies and volt-age points to enable power saving. The default value is [Enabled].

Configuration options: [Enabled] and [Disabled]. If you install Windows® VistaTM / 7 and want to enable

this function, please set to [Enabled]. This item will be hidden if the current CPU does not support Intel

SpeedStep technology.

        Please note that enabling this function may reduce CPU voltage and lead to system stability or 

compatibility issues with some power supplies. Please set this item to [Disabled] if above issues 

occur.

Intel Turbo Boost Technology

Use this to enable or disable Intel Turbo Boost Mode Technol¬ogy. Turbo Boost Mode allows processor
cores to run faster than marked frequency in specific conditions. The default value is [En-abled].

Additional Turbo Voltage 

Use this to add voltage when the CPU is in Turbo mode.

Internal PLL Overvoltage

Use this to enable/disable CPU Internal PLL Overvoltage.

Long Duration Power Limit

Use this to configure long duration power limit in watts.

Long Duration Maintained

Use this to configure the time window which the long duration power is maintained.

Summary of Contents for ARP-2215AP-G00




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands