manualshive.com logo in svg

Arista 7300 Series, Quick Start Manual

Share
Download
Arista 7300 Series Quick Start Manual Download Page 28

 

4.1

  Cabling the AC Power Supply

4.1.1

 Grounding the Switch

After mounting the switch into the rack, connect the switch to the data center ground. 

Figure 16:

Grounding Pad and ESD Grounding Pad Sockets 

 displays the location of the grounding pads located

on the front panel (left illustration) and rear panel (right illustration). After the switch is grounded, ESD
wrist straps can be grounded by connecting them to one of the grounding pads.

Important:  Grounding wires and grounding lugs (M4 x 0.7) are not supplied. Wire size should
meet local and national installation requirements. Commercially available 6 AWG wire is
recommended for installations in the U.S.

À la terre et de mise à la terre fils cosses (M4 x 0.7) ne sont pas fournis. Calibre des fils doit
satisfaire des exigences de l’installation locale et nationale. Disponible dans le commerce des
câbles 6 AWG sont recommandé pour les installations aux États-Unis.

1

Secondary ground

2

Secondary ground

3

Earth grounding pad

Figure 16: Grounding Pad and ESD Grounding Pad Sockets

4.1.2

 Connecting Power Cables to an AC Power Supply

Figure 17: Power Input Sockets 

 displays an AC power supply module, including the power input

socket.

24

Summary of Contents for 7300 Series



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands