Two circuits provide redundancy protection.
describes power cable requirements.
Figure 1: Airflow Direction
1 Ground Lug
6 ESD
2 Blue Handles indicates forward airflow
7 Console (Serial) Port
3 Ethernet Management Port
8 USB Port
4 System Status LED
9 Power Supply 2 Status LED
5 Fan Status LED
10 Power Supply 1 Status LED
1 Fan Module 1 Handle
4 Fan Module 3 Status LED
2 Fan Module 3 Handle
5 Fan Module 1 Status LED
3 Ground
Important:
The power input plug-socket combination must be accessible at all times; it provides the
primary method of disconnecting power from the system.
La combinaison de la puissance-prise d’entrée doit être accessible en tout temps ; Il fournit le
principal moyen de coupure d’alimentation du système.
•
Other Requirements: Select a site where liquids or objects cannot fall onto the equipment and
foreign objects are not drawn into the ventilation holes. Verify these guidelines are met:
•
Clearance areas to the front and rear panels allow for unrestricted cabling.
•
All front and rear panel indicators can be easily read.
•
Power cords can reach from the power outlet to the connector on the rear panel.
Important:
All power connections must be removed to de-energize the unit.
Toutes les connexions d’alimentation doivent être enlevées pour hors tension l’appareil.
6
