Arisco BW1200, Instruction Manual, Page: 8 / 19

8 / 19
5. TRANSPORTATION AND INSTALLATION
During transportation, take necessary precautions against the risk of falling down and being turned upside
down for the product.
Place the product onto a flat and solid ground.
Do not install the product near the flammable and explosive materials and do not keep any flammable and
explosive material near the furnace, while it is working.
Keep surely a fire extinguisher near the furnace and check whether the periodical checking of the fire
extinguisher has been implemented or not.
6. GENERAL PRINCIPLES
The users agree and accept to be in conformity with all requirements included in using manual, otherwise the machine
shall be deemed OUT OF GUARANTEE COVERAGE.
The user also accepts that he/she was fully informed about the limited guarantee liability.
Any living body or any object should not be placed on machines. In addition, any living body should not be put inside the
machines.
It should not be allowed the children or any other unauthorized persons to operate the machines.
Any electrical operating machines should be cleaned after the required electrical connections switched off.
The electrical products should never be operated if any sufficient grounding installation had not been practiced in
addition; the LEAK CURRENT RELAY and fuse groups had not been installed in control box supplying the electrical energy
to the machine.
The cover of any machine should not be opened during the period of working.
Use , foam free and foam controlled liquid detergent and polisher in your machine. While the device is working , do not
open in any way the cover of the device with cover.
Be careful not to squeeze your hands while closing the covers.
The machines and covers should not be treated as step or ladder in any case.
The electrical devices should never be washed in the manner of spraying water. They should be cleaned by means of
rubbing after switching the power off the power had been switched off.
Any scratchier or stripper tools should not be used during the cleaning.
This manual verifies all machines were tested and the required security controls were done in due diligence so delivered
under operating conditions.
Do not connect the devices, which are in connection with hose, to the waterlines in the temperatures below 5ºC and
above 50ºC.
Use rubber gloves during the cleaning and maintenance practices procedures
Do not remove the labels and panels of the devices.
Do not spray machine with water.
In order to use efficiently and to decrease minimum the energy expenses, supply water in 50ºC to your devices with
electrical heating system. Additionally, in order to elongate the life of your device, use surely soft water in 15 ºF If
you do not have the water in this softness, use a water softening device.
Check th einlet pressure 200-400 kPA.
Take care not to trap your hand when closing the door.