RECORD THE SONG
(Only support for device having VGA)
- Select the recording output USB/HDD; if record to USB, plug USB in the front/back side of the device:
* Press Setup
Code:’000000’
Display information
Press ENTER
Recording output (select place to
store the recorded song)
Press Setup to exit
Input the song code to be recorded (for example: to
record the song “Bản hùng ca chim lạc”, input:”52718”)
Press ENTER
Press RECORD
Plug Micro in
the front side of the device and sing to record. When the song is finished, the device will automatically
store the song in list of recorded songs
Press RECORD again to cancel recording
* Note: Record ahead by micro to have echo effects, turn off VOCAL/CHORUS, adjust Equalizer before
recording
- To replay the recorded song
Press MENU
Song
Collection
Recorded song, select the song to be
replayed
Press ENTER
- To delete some or all the songs (see page 13, section “Delete the song”)
NEW SONG UPDATE
- New song will be updated in 2 ways: from USB or from CD-ROM, the new VOl data will be copied to
USB or CD-ROM. If new VOL is copied to USB, plug USB in the back side of the device, turn off the device
and then turn on the device, it will automatically identify the file in new VOL and require the user to
press ENTER on the remote control. The device will automatically update. After finish updating, the
device will automatically restart.
- The similar steps for CD-ROM
* Note: To update new song, the user has to provide the hard disk serial number consisting of 32
characters available in the device (see page 10-1.Display information) to easily create the program
update; the manufacturers have printed the serial number attached at the back side of the device or on
the warranty, please check this serial number by comparing to the serial number displayed in the device,
have two ways to record the serial number:
+ Option 1: Press Setup
code:”000000”
Display information
Press ENTER
Press down key to move
to the section of HDD serial number and record the serial number
+ Option 2: Turn off the device
Plug USB into USB port at the back side of the device
Turn on the
device and wait the device to boot; the device will automatically create a text file (serial.txt) on the USB
containing hard disk serial number of 32 characters
Draw out the USB
Summary of Contents for 3600 HDD
Page 3: ...BASIC CONNECTION Connect to mouse Connect to keyboard ...
Page 22: ......