Motherboard Manual
50
VGA card or
monitor may
be defective
Troubleshooting
Troubleshooting Flowchart
Here are some flowcharts to help you check for common problems encountered during
system assembly
Check that all jumper settings are correct.
Clear the CMOS using the Clear CMOS Header
on the Mainboard
NO
Unexpected
Symptom
Turn OFF the system power and unplug the AC power cord.
Remove all add-on cards and peripherals including VGA, Floppy,
IDE and ATAPI devices.
Check that the CPU, memory modules, mouse, and keyboard
are properly installed on the mainboard and that the 115/230V
switch on the power is properly set.
Then, connect onboard VGA port to a monitor.
Plug the power cord into the onboard power connector(s) and
turn ON the power supply.
Make sure the system is still in a soft-OFF state.
YES
Contact your
authorized
dealer to
check your
system.
NO
YES
Power-On the system and check that the
power supply is working and that the fans
connected to the mainboard are ON
Continue to
Next Page of
Flowchart
Check to see that the
POST screen appears on
the monitor.
