3.5.2.1 Primary Master/Slave Sub Menu
The Primary Master/Slave Sub Menu looks like the following:
PhoenixBIOS Setup Utility
Advanced
Primary Master [120GB]
Item Specific Help
Type: [Enabled]
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Fast PIO 4]
Ultra DMA Mode: [Mode 5]
User = you enter
parameters of hard-
disk drive installed at
this connection.
Auto = autotypes
hard-disk drive
installed here.
1-39 = you select pre-
determined type of
hard-disk drive
installed here.
CD-ROM = a CD-
ROM drive is
installed here.
ATAPI Removable =
removable disk drive
is installed here.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
►
Sub-Menu F10 Save and Exit
The following table shows the items that you can customize on the Primary Master/Slave sub-menu page:
Item Options
Description
Type Auto
None
CD-ROM
ATAPI Removable
IDE Removable
Other ATAPI
User
User = you enter parameters of
hard-disk drive installed at this
connection.
Auto = autotypes hard-disk
drive installed here.
1-39 = you select pre-
determined type of hard-disk
drive installed here.
CD-ROM = a CD-ROM drive
is installed here.
ATAPI Removable = removable
disk drive is installed here.
Multi-Sector Transfers
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Specify the number of sectors
per block for multiple sector
transfers. “MAX” refers to the
size the disk returns when
queried.
LBA Mode Control
Disabled
Enabled
Enabling LBA causes Logical
Block Addressing to be used in
place of Cylinders,
Heads_Sectors.
44
